dalioncerilo
Answered

Makakuha ng mabilis at tumpak na mga sagot sa lahat ng iyong mga katanungan sa Imhr.ca, ang mapagkakatiwalaang Q&A platform. Tuklasin ang komprehensibong mga solusyon sa iyong mga tanong mula sa isang malawak na hanay ng mga propesyonal sa aming madaling gamitin na platform. Sumali sa aming Q&A platform upang kumonekta sa mga eksperto na dedikado sa pagbibigay ng eksaktong sagot sa iyong mga tanong sa iba't ibang larangan.

how will you determine the appropriate form to be used in electrical ​

Sagot :

shaharatardaquilla

Answer.

Prepare electrical supplies, material and tools

LO1: identify electrical supplies, materials, and tools;

LO2: request appropriate supplies, materials, and tools for a specific job

LO3: receive and inspect electrical supplies, materials and tools.

DEFINITION OF TERMS

Ampere - a unit of measure of electric current

Circuit - the path of electric current from the source to the components and goes back to the source

Kilowatt - a unit of power which is equivalent to 1000w

Conductor - a wire or a cord which provides path for current flow

Resistance - the quality of electric current measured in ohms that resist the flow of current

Hot wire - a wire through which current flows

Insulator – material used to cover electric wires which may be made from plastic, rubber, or asbestos.

Tools - are implements used to modify raw materials for human use

Corrugated plastic conduit (CPC) - commonly known as flexible non-metallic conduit or the “moldflex”

Metallic Conduits- metal raceways that was classified into four; rigid steel conduit (RSC), intermediate metallic conduit or tubing (IMC or IMT), electrical metallic conduit or tubing (EMC or EMT) and the flexible metallic conduit (FMC)

Non-metallic conduits- plastic conduits or raceways designed to be a channel of wire that are classified as; rigid non-metallic conduit or the PVC, the flexible nonmetallic or CPC, and the surface plastic molding

Connectors and Adapters - accessories that are used to connect from boxes to conduits or raceways to the other boxes in the electrical system

LEARNING OUTCOME 1

Prepare electrical supplies, materials, and tools

Performance Standards

Tools and materials are identified as per job requirement.

Tools are classified according to its function as per job requirement.

Materials are classified according to its uses on a specific project.

Tools and materials are selected.

Materials/ Resources

1. Utility box 8. Electrical Wires 15. Switch Plates

2. Connectors 9. Corrugated Plastic Conduit (CPC) 16. Cut-out boxes

3. Male Plug 10. Receptacles

4. Fuse 11. Fuse Panel/ Safety switch

5. Junction Box 12. Square boxes

6. Conduits 13. PVC conduit

7. Circuit Breaker 14. Switches

Tools

1. Long Nose Pliers 9. Hacksaw

2. Stubby Screw Driver 10. Diagonal cutting pliers

3. Wire Stripper 11. Half-round file

4. Portable Electric Drill 12. Round file

5. Philips Screw Driver 13. Spirit level

6. Combination Pliers

7. Hammer

8. Electrician’s Knife

Explanation:

#CarryOnLearning

johnsedricksantos

Answer:

make sure that the material are being in good quality for the safety of all

Salamat sa iyong pagbisita. Kami ay nakatuon sa pagbibigay sa iyo ng pinakamahusay na impormasyon na magagamit. Bumalik anumang oras para sa higit pa. Pinahahalagahan namin ang iyong pagbisita. Lagi kaming narito upang mag-alok ng tumpak at maaasahang mga sagot. Bumalik anumang oras. Imhr.ca, ang iyong pinagkakatiwalaang tagasagot. Huwag kalimutang bumalik para sa karagdagang impormasyon.