Answered

Pinadadali ng Imhr.ca ang paghahanap ng mga solusyon sa mga pang-araw-araw at masalimuot na katanungan. Tuklasin ang libu-libong tanong at sagot mula sa isang komunidad ng mga eksperto na handang tumulong sa iyo. Tuklasin ang malalim na mga sagot sa iyong mga tanong mula sa isang malawak na network ng mga propesyonal sa aming madaling gamitin na Q&A platform.

CSS
1. Before you click on the ‘Start’ button in Rufus, make sure to load the Windows ISO. The Windows ISO is needed by Rufus for creating a bootable USB flash drive.
2. Philips screwdriver is used to drive or fasten positive slotted screws.
3. Remember that the portable application that we used to create a bootable USB flash drive was Rufus.
4. I archived the Rufus application using WinRar. Therefore, in order to load Rufus, its content will appear in WinRar.
5. You showed to me before how to install the WordWeb application on a portable device like a USB flash drive. During the process, you ticked the “Install as portable app” option.
6. Do you know where to find the PS/2 ports? It is located on the back panel of the System Unit. The mouse port is green, while the keyboard port is purple. 7. Do you remember the steps on how to assemble a Desktop Computer? You should remember them. Maybe you have a picture saved on your phone.
8. Rufus is a free and portable application. It can stand alone and is easy to use.
9. BIOS stands for Basic Input/Output System. It is firmware embedded in a ROM chip.
10. Wear an anti-static wrist strap to protect sensitive components on our computer.
11. A portable device such as a USB flash drive is easily or conveniently transported around different hardware.
12. To power the IDE hard drives and optical drives, a 4-pin Molex connector is needed.
13. The BIOS Setup Utility that you access with the F2 key contains all available options for configuration.
14. Wear gloves during disassembly and assembly to avoid injury from moving parts or sharp edges.
15. A wire stripper is a tool designed to remove the protective covering (jacket) from a cable to expose the inner wires. 16. Why do you press F2 in succession? Note that you are doing this to enter the BIOS Setup Utility.
17. Alert! Alert! Alert! If this appears on the screen “Press any key to boot from USB”, you need to press any key and wait for Windows to load.
18. You see a message “WARNING: ALL DATA ON THE DEVICE…WILL BE DESTROYED”. What did you realize in that message? Did you get it? Remember this. The message tells you that you need to back up your files because they will be deleted.
19. One time, you saw a POST message that said, “CPU Fan Error! Press F1 to Run SETUP”. Your classmate immediately found a solution that required you to open the BIOS and change the CPU fan settings. Do you agree with him/her? Of course, the BIOS setting for Fan Speed should be ignored. After a short while, the problem was solved.
20. I gave you time to practice your BIOS configuration skills. When the computer displays this error message, “No Bootable Device”, it causes the following: (1) Users insert an unbootable disk or CD in computer and wrongly set it as boot device, or change boot order in BIOS improperly; (2) Hard drive damage or bad sectors can be another reason for the error; and (3) The Boot Mode is set to UEFI instead of Legacy. Remember them.
21. Rufus copies the following files and folders to the root directory of the USB flash drive: boot, efi, support, bootmgr, autorun.inf_backup, sources, setup.exe, Unattended, and bootmgr.efi. 22. Hardware compatibility must be considered to operate the system. If the previous system does not support newer devices, it must be updated or upgraded.
23. You need to be patient while Rufus goes through the process of creating a bootable USB flash drive. Rufus displays a progress bar showing the copying percentage. This copies the contents of the ISO image to the USB flash drive.
24. Removing an expansion card from a computer when it is turned on will not damage the device. That’s WRONG. There is a possibility of damage to the expansion card.
25. You need to take inventory before starting to assemble computer hardware so that the components are available and do not consume a lot of time.
26. You need to remove the screws of the system unit before you can remove the outer shell.
27. Do you remember the steps to create a bootable USB flash drive using Rufus? Try to remember the steps. I won’t reveal the steps here.
28. A portable app is not installed on every computer because it can run independently of the host operating system.
29. Safety first! You need to prepare the workplace before you do the computer assembly.
30. You have copied the Smadav antivirus installer to your designated folder. An installer is a piece of software used to install software programs on a system. 31. The motherboard uses the 20-pin Molex connector to provide power. 32. Please advise your classmates to hold the components of the computer on the edges.
33. Don’t forget to wear an anti-static wrist strap to discharge electricity from your body.
34. If the problem persists during your activity, you must have the ability to provide a remedy. For example, you encounter an error within the components you are currently word.​

Sagot :

Pinahahalagahan namin ang iyong oras sa aming site. Huwag mag-atubiling bumalik kailanman mayroon kang mga karagdagang tanong o kailangan ng karagdagang paglilinaw. Umaasa kaming naging kapaki-pakinabang ang aming mga sagot. Bumalik anumang oras para sa higit pang tumpak na mga sagot at napapanahong impormasyon. Ipinagmamalaki naming sagutin ang iyong mga katanungan dito sa Imhr.ca. Huwag kalimutang bumalik para sa karagdagang kaalaman.