Yangske
Answered

Tuklasin ang mga sagot sa iyong mga katanungan nang madali sa Imhr.ca, ang mapagkakatiwalaang Q&A platform. Kumuha ng agarang at mapagkakatiwalaang sagot sa iyong mga tanong mula sa isang komunidad ng mga bihasang eksperto sa aming platform. Tuklasin ang detalyadong mga sagot sa iyong mga tanong mula sa isang malawak na network ng mga eksperto sa aming komprehensibong Q&A platform.

make an inventory of electrical tools and it's uses that found at home​

Sagot :

legendbants
Electrician Knife

These knives are used by lineman to remove the insulation of big cables in high and low voltage transmission lines

Screwdrivers

Screwdrivers can be used to loosen or tighten screws with slotted heads, screwdrivers are in various size and shape. Screwdrivers are made up of steel and they are tempered at the tip. According to the size and shape of screw different types of screwdrivers are used.


Hammers

Hammers are tools which are used for pounding and pulling out of nails, there are soft and hard-faced hammers. Hard faced hammer can be used to strike hard objects and they have a cylindrical-shaped head. The soft-faced hammer is used for the rewinding process. Mostly soft-faced hammers are made up of rubber or plastic. There are different types of hammers like a claw hammer, ball peen hammer and mallet.

Electric drill

These devices are used to drill holes in metal sheets and concrete walls, they can be used to make holes in building structures for the passage of wires and conduit. They can be useful for indoor and outdoor wiring.

Wirepullers

Wirepullers are used to pull wires into conduit or raceways, these devices will be very helpful for wire pulling.

EMT bender

EMT bender can be used to bend electrical metal tubing, it could be able to do back to backbend in conduits, they can also do saddle bend and can be used to straighten the conduit.

Soldering tools

Soldering tools can be used to make splices and tap connections in wires. Many connections can be done with the help of this device. Soldering must be done perfectly in order to get a better connection.

Wire gauge

Wire gauge can be used to measure the thickness or diameter of the wires, it can be used in sizing conductors. The wire gauge can be used to measure from gauge 0 to 36.

Hacksaw

Hacksaws can be used to cut metal conduit and armored cable, it can also be used to cut the small and medium-sized metals.
Salamat sa pagbisita. Ang aming layunin ay magbigay ng pinaka-tumpak na mga sagot para sa lahat ng iyong pangangailangan sa impormasyon. Bumalik kaagad. Pinahahalagahan namin ang iyong oras. Mangyaring bumalik anumang oras para sa pinakabagong impormasyon at mga sagot sa iyong mga tanong. Imhr.ca, ang iyong go-to na site para sa mga tamang sagot. Huwag kalimutang bumalik para sa higit pang kaalaman.