Answered

Tinutulungan ka ng Imhr.ca na makahanap ng maaasahang mga sagot sa lahat ng iyong mga katanungan mula sa mga eksperto. Maranasan ang kadalian ng pagkuha ng mabilis at eksaktong sagot sa iyong mga tanong mula sa mga propesyonal sa aming platform. Kumuha ng agarang at mapagkakatiwalaang mga solusyon sa iyong mga tanong mula sa isang komunidad ng mga bihasang eksperto sa aming platform.

briefly state and explain the common jome audio amplifier probkem​

Sagot :

theVilliaverde

Answer:

4 Common Reasons For An Amplifier To Stop Working

Explanation:

The Amplifier Doesn’t Power On At All

For the amplifier to turn on in the first place, it is important that it gets the right power needed to get turned on. Check for the power wire at both the ends, one at the amplifier end and the other at the socket end.

If any of these ends are not properly attached, it will pass no current. Moreover, if the voltage is too low, it will not have enough power to turn the amplifier on!

The ‘Protect Mode’ Light Turns On

Your amplifier has a protect line which turns on if there is already any damage done in its internal parts like speaker, sub-woofer, cable or any other component. This light is kind f a signal to prevent any kind of further damage.

So, if you find your protect light to be on, it is recommended to take professional help as you may not have any idea as to which internal part has got damaged.

No Sound is Coming From The Speakers

If you hear no sound from the amplifiers, then you definitely have problems either with the speakers or the cables which connect your speakers and the amplifier. For this, try to unplug the RCA cables from each unit and reconnect them.

Make sure the volume is turned on at both the ends and still if you can’t hear anything, then there is some definite fault in the audio jack of either of the two units.

You Hear a Lot Of Distortion From The Speakers

A bad or underpowered amplifier can result in a lot of distorted sounds from the speakers. Improper wiring, bad grounds, ground loops are several other factors that leads to sound distortion. Try to see if the patch cables and speaker wires are working fine.

Also, try to separate the cables of head unit and amplifier as they have the tendency to pick up interface and lead to a distorted sound. If still you cannot hear the sound clearly, it is best to call out a professional to quickly fix the issue.

Need Some Professional Help?

If your amplifier is not working up to the mark or failed completely and you have tried everything at your end, its time to call Fields Television in Winnipeg. Our professionals resolve such issues on daily basis and know how to fix such issues in the minimum possible time.

Umaasa kami na nakatulong ang impormasyong ito. Huwag mag-atubiling bumalik anumang oras para sa higit pang mga sagot sa iyong mga tanong at alalahanin. Salamat sa pagbisita. Ang aming layunin ay magbigay ng pinaka-tumpak na mga sagot para sa lahat ng iyong pangangailangan sa impormasyon. Bumalik kaagad. Bumalik sa Imhr.ca para sa karagdagang kaalaman at kasagutan mula sa mga eksperto.