B. TRUE OR FALSE
Directions: Read each statement very carefully. Write TRUE if the statement is
correct and FALSE if it is wrong. Write your answer on the space provided
before the number.
1. Oil the movable parts of the measuring tools such as zigzag rules, calipers,
and dividers and compasses every minute to avoid stock-up.
2. Do not pull the steel tape of pull-push rule too much to avoid the coil spring
from damage.
3. Check the lock of a pull-push rule if it is working when it is only needed.
4. Wipe off edges of the steel tape of pull-push rule with bare hands to make
sure that it is clean.
5. Make sure that grits like sand do get inside the housing or case of a pull-push
rule to avoid wearing off of the graduations.
6. Wipe measuring tools/instruments before retuming them to the
storage room.
7. Do not use the caliper as tongs.
8. Pull-push rule is used for measuring long pieces of stock.
9. There are nine linear measuring instruments or tools that can be used
in measuring various materials. These linear measuring tools are
caliper, compass, divider, meter stick, protractor, pull-push rule, ruler,
try square, and zig zag rule.
10. Linear Measure is a measurement of length. An example of linear
measure is using meter stick or stick yard to find out the length of the
table.